Garage Epoxy Flooring Cost in Australia — 2026 Pricing Guide

You’ve decided to upgrade your garage floor. Now you want to know what it actually costs — and why the quotes you’ve seen vary so much. The honest answer is that garage epoxy flooring cost in Australia depends on four things: the system you choose, the size of your floor, the condition of your slab, and the specification standard the installer uses.

This guide breaks down 2026 garage epoxy pricing across all Resin Masters service locations — Brisbane, Gold Coast, Logan, Sunshine Coast, Toowoomba, Ipswich, and Northern NSW — with full transparency on what’s included, what drives variation, and what the DIY alternative actually delivers compared to professional installation. Every price range in this guide reflects our actual 2026 installed pricing. No hidden extras, no bait-and-switch ranges — the same approach we take with every written quote.

2026 Garage Epoxy Flooring Cost by System

The system you choose is the primary driver of per-m² cost. Resin Masters installs four main garage floor systems, each at a different price point reflecting material cost and installation complexity.

System	Cost per m²	Single Garage (18m²)	Double Garage (36m²)	Triple Garage (54m²)
Solid Colour Epoxy	$50–$75	$900–$1,350	$1,800–$2,700	$2,700–$4,050
Seamless Flake Epoxy	$65–$90	$1,170–$1,620	$2,340–$3,240	$3,510–$4,860
Metallic / Marble Effect	$90–$165	$1,620–$2,970	$3,240–$5,940	$4,860–$8,910
Full Polyaspartic System	$75–$110	$1,350–$1,980	$2,700–$3,960	$4,050–$5,940
Epoxy Over Existing Tiles	$60–$100	$1,080–$1,800	$2,160–$3,600	$3,240–$5,400

ALL PRICES ABOVE INCLUDE: Free on-site assessment, industrial diamond grinding, moisture vapour testing, moisture-tolerant primer, full 100% solids low-VOC epoxy system to specified thickness, UV-stable polyaspartic topcoat, GST, and 7-year warranty. Prices are based on a slab in standard condition. Additional preparation items (oil contamination treatment, previous coating removal, structural crack repair) are disclosed separately after on-site assessment.

Garage Epoxy Cost by Floor Size — What Size Are You Working With?

Floor size affects the per-m² rate as well as the total cost — larger garages benefit from economies of scale on the fixed components of every installation (site visit, equipment setup, primer application logistics). A single-garage job has the same fixed overhead as a double-garage job spread across roughly half the area, which is why the effective per-m² rate is slightly higher for small single garages than for large triple-garage installations.

Garage Type	Approx. Area	Solid Colour Total	Flake Total	Metallic Total
Single garage	~18m²	$900–$1,350	$1,170–$1,620	$1,620–$2,970
Double garage	~36m²	$1,800–$2,700	$2,340–$3,240	$3,240–$5,940
Large double / triple	~54m²	$2,700–$4,050	$3,510–$4,860	$4,860–$8,910
Oversized / 4+ car	~72m²+	$3,600–$5,400	$4,680–$6,480	$6,480–$11,880

What Drives the Variation Within Each Price Range?

Every price range in this guide has a lower and upper bound — and the difference between a $1,800 double garage and a $2,700 double garage in the solid colour category is real. Understanding what sits at the upper end of each range helps you assess quotes accurately.

Slab Condition

A clean, sound concrete slab in a recently built home — Springfield Lakes, Coomera, Ripley — sits at the lower end of the preparation cost range. An older garage in an established Brisbane or Ipswich suburb with oil contamination, a delaminated previous coating, and crack networks sits at the upper end. Oil contamination treatment, previous coating removal, and structural crack repair are the main preparation cost variables — and they are disclosed in the Resin Masters written quote after on-site assessment, not discovered on installation day.

System Complexity

Within the metallic category, a single-tone metallic in a standard colour direction sits toward $90–$120/m². A complex multi-tone metallic with a custom colour direction developed from a specific brief sits toward $145–$165/m². The technical complexity and time required to hand-work pigments into flowing multi-layer effects produces a genuine cost difference within the category. Solid colour and standard flake systems show less variation within their ranges — the main variable is slab condition and floor size rather than application complexity.

Non-Slip Specification

Standard Resin Masters installations include UV-stable polyaspartic topcoat as baseline. Where a documented AS 4586 non-slip rating is required — for garages shared with elderly residents, commercial applications, or where a slip resistance certification is specifically needed — we broadcast anti-slip aggregate at the topcoat stage. This is included in most standard quotes without additional cost. For commercial applications requiring formal AS 4586 testing and written documentation, this becomes a minor additional line item.

What’s Included in a Resin Masters Quote — Line by Line

Every Resin Masters garage floor epoxy quote itemises the following components. The price you see in the quote is the price on your invoice — no contingency charges, no on-site variations, no extras that appear after the job is underway.

• Free on-site assessment — site visit, slab condition assessment, moisture vapour testing, colour sample consultation
• Industrial diamond grinding — full-floor mechanical profiling to the adhesion depth the specified system requires
• Moisture vapour emission testing — calibrated assessment determining which primer is appropriate for your slab
• Primer — selected matched to moisture reading and compatible with the specific epoxy system above it
• Base coat(s) — 100% solids low-VOC commercial-grade epoxy in the specified colour direction; one or two coats depending on system
• Flake broadcast — for flake systems: full-coverage vinyl chip broadcast across the wet base coat
• Metallic pigment application — for metallic systems: hand-working of metallic pigments during the application window
• UV-stable polyaspartic topcoat — heat-resistant, UV-stable topcoat standard on every installation
• GST
• 7-year written warranty — documented, enforceable, covers any defect arising from our preparation or installation process

WHAT ISN’T IN THE STANDARD QUOTE (disclosed separately after on-site assessment): Oil contamination treatment for petroleum-impregnated zones — $8–$15/m² for affected areas. Previous coating or paint removal where existing system is present — $5–$12/m². Structural crack repair beyond surface filling — $15–$45 per linear metre. These items are identified during the on-site assessment and added to the quote before any commitment.

DIY Garage Epoxy Kits vs Professional Installation — The Real Cost Comparison

DIY garage epoxy kits from Australian hardware stores advertise at $300–$800 for a standard double garage. The real cost comparison involves three dimensions that the retail kit price doesn’t capture.

Product Performance

Retail kits use water-based epoxy chemistry that deposits a thin, permeable film — typically under 1mm dry film thickness. Resin Masters’ 100% solids commercial-grade epoxy builds to 2–3mm dense, impermeable film. The difference under a loaded vehicle tyre on a Queensland summer day is not a technical abstraction — it’s the difference between a floor that tracks tyre marks within one summer and one that doesn’t.

Preparation Quality

Retail kits recommend acid etching as preparation. Professional installation uses industrial diamond grinding. The adhesion difference between an acid-etched and a diamond-ground surface under sustained vehicle traffic is the primary reason DIY garage floors fail — often before the product’s own technical limits are reached.

Total Cost Over 10 Years

Scenario	Year 0 Cost	Year 3–5 Cost	Year 8–10 Cost	10-Year Total
DIY kit — 2 applications	$400–$800	$400–$800 (re-application)	$400–$800 (re-application)	$1,200–$2,400
Professional epoxy — Resin Masters	$1,800–$2,700	$0 (7-yr warranty)	$0 (still in warranty)	$1,800–$2,700
Note	DIY cost assumes re-application every 3–5 years	Professional: 7-year warranty then 5+ years remaining lifespan	Same floor — no re-installation needed	Professional cheaper over 10 yrs at scale

At double-garage scale and beyond, professional installation consistently proves cheaper over the floor’s useful life than repeated DIY re-application. At single-garage scale with non-vehicle use, a quality DIY kit used correctly may be adequate — but the preparation standard, product quality, and warranty of professional installation are not comparable. Contact Us!

How to Get an Accurate Garage Epoxy Quote from Resin Masters

Accurate garage floor epoxy quotes require an on-site assessment — not a per-m² calculation over the phone. The slab condition, existing contamination, previous coating presence, crack profile, and moisture reading all affect the final price in ways that a measurement alone cannot determine. Resin Masters provides free on-site assessments across all 7 service locations and delivers a written, itemised quote within 48 hours of the site visit.

At the assessment, we bring physical colour and flake samples in your garage’s actual lighting conditions — colour decisions made in the space consistently produce better outcomes than selections from photographs or catalogues. We also test the slab for moisture vapour emission, identify any oil contamination zones, and confirm whether previous coatings require removal — so the written quote reflects the actual scope of work rather than an optimistic estimate.

Brisbane & Surrounds	Gold Coast & Logan	Sunshine Coast	Toowoomba
Ipswich	Northern NSW	Free Quote — 48hr Turnaround	7-Year Warranty Included

Also Read:- Garage Floor Epoxy vs Tiles vs Rubber Matting — Which Is Best for an Australian Garage?

Frequently Asked Questions — Garage Epoxy Flooring Cost

How much does garage epoxy flooring cost per square metre in Australia?

Resin Masters installs garage floor epoxy across Brisbane, Gold Coast, Logan, Sunshine Coast, Toowoomba, Ipswich, and Northern NSW at $50–$165 per square metre installed in 2026, depending on the system chosen and the specific conditions of your slab. Solid colour epoxy runs $50–$75/m². Seamless flake epoxy runs $65–$90/m². Metallic and marble-effect epoxy sits at $90–$165/m². These prices include diamond grinding, moisture testing, primer, the full 100% solids low-VOC epoxy system, UV-stable polyaspartic topcoat, and GST. They also include the 7-year warranty Resin Masters writes into every installation quote.

What does it cost to epoxy coat a single garage vs a double garage in Australia?

A standard single garage floor (approximately 18m²) with Resin Masters solid colour epoxy costs $900–$1,350 installed. A standard double garage (36m²) costs $1,800–$2,700. A double garage with seamless flake epoxy runs $2,340–$3,240. A double garage with metallic epoxy sits at $3,240–$5,940 depending on the specific colour direction and complexity. Triple garages (54m²+) benefit from improved per-m² economics — the fixed site visit, setup, and equipment costs are spread across a larger area, reducing the effective per-m² rate by approximately 10–15% compared to a single-car garage job. Note that all prices above are based on a clean slab in standard condition. Slabs with significant oil contamination, previous coating removal, or structural crack repair incur additional preparation costs disclosed in the written quote after on-site assessment.

What factors affect the price of garage epoxy flooring in Australia?

Five factors drive variation in garage floor epoxy pricing across our service locations. (1) System type — solid colour, flake, metallic, or polyaspartic. Each system has a different material cost and installation time, producing different per-m² rates. (2) Slab condition — a clean new concrete slab costs less to prepare than an older slab with oil contamination, previous paint, or significant crack repair requirements. Preparation costs are the primary variable in quotes for older garages. (3) Floor size — larger floor areas produce better per-m² rates through economies of scale on fixed setup costs. (4) Access and site conditions — ground-level standard access is the baseline. Restricted access, multiple levels, or unusual drain configurations add complexity. (5) Location — Toowoomba and Northern NSW projects may carry a minor travel component for very remote properties, though Resin Masters services all 7 locations at competitive pricing from our SEQ base.

What’s included in a Resin Masters garage epoxy quote — are there hidden extras?

A Resin Masters garage floor quote itemises every component separately: free on-site assessment and measurement, industrial diamond grinding (standard preparation), moisture vapour emission testing, primer, the specified epoxy system (base coat or coats, flake broadcast where applicable, or metallic pigment application), UV-stable polyaspartic topcoat, GST, and the 7-year warranty. There are no standard hidden extras. The only items that appear as separate line items in some quotes are: oil contamination treatment (where identified during on-site assessment), structural crack repair (where cracks require filler beyond surface-level treatment), and tile or previous coating removal (where a previous system is present). These are all disclosed transparently in the written quote before any commitment. The price in your written Resin Masters quote is the price on your invoice.

How does the cost of professional epoxy compare to DIY garage floor kits?

DIY garage floor epoxy kits from Australian hardware stores cost $300–$800 for a standard double garage — approximately one-quarter to one-third of a professional installation. The cost comparison changes significantly when you account for what each delivers. DIY kits use water-based epoxy chemistry that deposits a thin, permeable film inadequate for sustained vehicle traffic in Australia’s heat. Professional 100% solids commercial-grade epoxy from Resin Masters deposits a 2–3mm dense, impermeable film that handles vehicle loads, chemical spills, and Queensland’s thermal cycling. DIY preparation relies on acid etching rather than diamond grinding — producing adhesion that fails within two summers under vehicle heat. Professional preparation includes diamond grinding, moisture testing, and properly matched primer. DIY kits offer no warranty. Resin Masters provides a 7-year written warranty. For light-duty, non-vehicle use in a sheltered space, a quality DIY kit may be adequate. For any garage that sees regular vehicle use, professional installation delivers better value over the floor’s full lifespan.

Does epoxy garage flooring cost more than garage tiles?

Installed professionally, garage tiles typically cost $45–$85/m² for ceramic or porcelain, $55–$95/m² for large-format commercial tile, or $30–$60/m² for interlocking polypropylene tiles (the plastic grid type). Solid colour professional epoxy from Resin Masters starts at $50–$75/m² — comparable to or less than ceramic tile at the entry level. The meaningful cost comparison, however, is over the floor’s lifespan. Garage tiles develop cracked grout within 3–5 years of vehicle traffic, create cleaning difficulty at every grout joint, and require periodic re-grouting or tile replacement. Epoxy maintains its seamless surface for 12–20 years without grouting, re-sealing, or joint maintenance. When you calculate the 20-year cost of each — installation plus maintenance — professional epoxy is typically the more cost-effective option for vehicle-use garages.

Are there different price points for different epoxy colours and finish types?

Yes — finish type is the primary driver of per-m² pricing variation within a single service location. Solid colour epoxy ($50–$75/m²) uses a single pigmented base coat, which is the most straightforward system to apply. Seamless flake epoxy ($65–$90/m²) adds the flake broadcast and additional topcoat stage. Metallic and marble-effect epoxy ($90–$165/m²) involves hand-working metallic pigments during the application window — a more technically demanding and time-intensive process. Within each finish category, colour choice doesn’t meaningfully affect price — a charcoal solid colour costs the same as a mid-grey solid colour. The technical complexity of the application, not the specific colour chosen, determines the cost difference between finish types. Custom metallic colour directions developed from specific client briefs may sit at the upper end of the metallic range depending on pigment selection.

What preparation steps add to the cost of a garage epoxy installation?

Standard preparation — diamond grinding, moisture testing, and primer — is included in every Resin Masters quote as a base. Four preparation scenarios add cost above the standard inclusion: (1) Oil contamination treatment — scarification and specialist degreaser application for petroleum-impregnated slabs, typically adding $8–$15/m² for contaminated zones. (2) Previous coating removal — where a previous epoxy, paint, or sealer system needs complete removal before new installation, adding $5–$12/m² depending on coating thickness and adhesion. (3) Structural crack repair — epoxy or polyurea crack injection for cracks requiring more than surface filling, typically $15–$45 per linear metre of crack depending on width and depth. (4) Moisture barrier systems — for slabs with elevated moisture vapour emission readings requiring specialist vapour barrier primer rather than standard primer, adding $6–$12/m². Every additional preparation item is itemised in the written quote before any commitment.

How long does garage epoxy flooring installation take — and does duration affect cost?

A standard single or double garage installation from Resin Masters takes 2 days on-site: day one covers diamond grinding, crack repair, primer, and base coat application. Day two (typically 24 hours later) covers topcoat application. The floor is walkable within 24 hours of the final coat and vehicle-ready within 48–72 hours. Full chemical cure takes 7 days. Installation time doesn’t materially affect the quoted cost for standard garages — Resin Masters quotes on a per-m² basis that incorporates typical labour time. Garages with unusual substrate conditions requiring additional preparation time (significant oil contamination, extensive crack networks, or previous coating removal) may involve an additional preparation day, which is disclosed in the itemised quote after on-site assessment. Triple garages and larger floor areas may extend to a 3-day programme.

How do garage epoxy costs vary between Brisbane, Gold Coast, Toowoomba, and other service locations?

Resin Masters prices garage floor epoxy installations competitively across all 7 service locations. Brisbane, Gold Coast, Logan, Sunshine Coast, and Ipswich projects carry the same base per-m² rates — all within close travel distance of our SEQ base. Toowoomba projects are typically quoted at SEQ-equivalent pricing due to our regular service schedule through the Darling Downs region. Northern NSW projects (Byron Bay, Ballina, Lismore) are also priced competitively with no significant regional premium — we service Northern NSW regularly and build travel into our operational planning rather than passing it onto individual job quotes. For any specific location within or adjacent to our 7 service areas, contact us at +61 433 733 956 for a location-specific quote.

Can I get an estimate for a flake epoxy finish for my garage floor?

Seamless flake epoxy flooring from Resin Masters costs $65–$90 per square metre installed across our service locations. A standard single garage (18m²) with flake epoxy costs $1,170–$1,620. A double garage (36m²) costs $2,340–$3,240. These estimates are based on standard slab condition and include all preparation, flake broadcast to full coverage, UV-stable polyaspartic topcoat, and 7-year warranty. For a firm itemised quote, we visit your garage, assess the slab, bring physical flake colour samples in different sizes (3mm standard, 6mm medium, mixed blend), and provide a written quote within 48 hours. Flake epoxy is Resin Masters’ most popular garage floor system — the multi-colour chip pattern conceals oil drips and everyday workshop marks far better than solid colour, and the natural texture of the embedded chips provides better everyday grip than a smooth surface.

Which companies install garage epoxy flooring across Australia — how do I choose the right one?

Resin Masters installs garage epoxy flooring across Brisbane, Gold Coast, Logan, Sunshine Coast, Toowoomba, Ipswich, and Northern NSW. When evaluating any garage epoxy installer, ask five questions: (1) Do they use 100% solids commercial-grade epoxy — or water-based products? (2) Do they diamond grind every slab, or rely on acid etching? (3) Do they specify a UV-stable polyaspartic topcoat for Australian conditions? (4) Do they provide a written warranty — and for how many years? (5) Is the quote fully itemised with every component listed separately? Resin Masters answers yes to all five — using 100% solids low-VOC epoxy, diamond grinding on every installation, UV-stable polyaspartic topcoat as standard, and a 7-year written warranty on every job. These five questions separate professional-grade installations from cheaper alternatives that produce beautiful floors that fail within two Australian summers.

Are there affordable garage epoxy options for budget-conscious homeowners?

Solid colour epoxy from Resin Masters at $50–$75/m² is the most cost-effective professional garage floor system available — and it’s a genuinely professional result using the same 100% solids low-VOC chemistry and diamond grinding preparation as our premium metallic systems. For a standard double garage (36m²), solid colour epoxy costs $1,800–$2,700 installed with 7-year warranty — less than many homeowners spend on a set of tyres. The price point at which professional installation becomes poor value relative to DIY is a very small single garage with light non-vehicle use. For any garage that sees regular vehicles, professional 100% solids installation with a written 7-year warranty is a better investment than a $400 retail kit that peels within two summers.

What additional costs should I expect when getting garage epoxy in Australia — are there extras I should plan for?

Beyond the base installation price, Australian homeowners should plan for three potential additional items. (1) Slab remediation — oil contamination treatment, previous coating removal, or structural crack repair for older or damaged slabs. These are disclosed in the written quote after on-site assessment, not discovered after installation begins. (2) Anti-slip aggregate — if you want a documented AS 4586 non-slip specification (recommended for garages with elderly residents or in households with young children), this adds a small topcoat material cost, included in most Resin Masters standard quotes. (3) Custom colour samples — if you’re undecided between colour directions and want large physical sample boards left with you for a few days before committing, this is generally provided at no cost during the free consultation. Resin Masters doesn’t charge for the on-site assessment, the written quote, or the physical sample consultation. The price in your quote is the complete price.

Also Read:- UV-Resistant Garage Epoxy — Why It Matters in Queensland’s Climate