Servicing : Gold CoastBrisbaneSunshine CoastToowoomba
Epoxy Flooring & Epoxy Floors in Brisbane
Resin Masters installs epoxy flooring across Brisbane, from Chermside to Carindale and out to North Lakes. Most garage floors cost $60–$100 per m², which is about $1,350–$2,200 for a single flake garage. Every slab is moisture-tested and diamond-ground before the first coat, and every floor comes with a 7-year written workmanship warranty.
$60–$100 per m²
Most garage floors
7 Year
written workmanship
5.0 ★
556+ Google reviews
Get a FREE Quote Now!
You’ve probably seen it. A neighbour’s garage looked brilliant for six months. Then a white bubble appeared near the door. By the second summer, hot tyres were lifting chunks of it off the slab.
That isn’t bad luck. It’s what happens when epoxy goes over concrete that wasn’t ground, or a slab that was still pushing out moisture. Brisbane makes this worse than most cities: older slabs carry decades of oil and old sealer, and summer humidity drives more moisture up through the concrete.
We’re an epoxy flooring company based in Pimpama, and we install epoxy floors for Brisbane homes, shops and warehouses. This page covers what we install, what it costs, the suburbs we work in, and how to compare us against any other installer you’re getting quotes from.
Epoxy floors and concrete coatings we install in Brisbane
We don’t sell one floor to everybody. A double garage in Aspley, a café kitchen in West End and a warehouse in Eagle Farm need different systems. Pick the one closest to your job:
| Floor | Best For | Brisbane Page |
|---|---|---|
| Seamless flake epoxy | Garages, laundries and patios. Hides dust and tyre marks, with added grip. | Flake epoxy flooring Brisbane |
| Metallic epoxy | Living areas, showrooms and feature garages. Marble-like, unique finishes. | Metallic epoxy flooring Brisbane |
| Solid colour epoxy | Workshops, storerooms and clean, modern garages. | Solid colour epoxy Brisbane |
| Industrial epoxy | Factories, plant rooms and chemical exposure. | Industrial epoxy flooring Brisbane |
| Warehouse epoxy | Forklift traffic, line marking and dust control. | Warehouse epoxy flooring Brisbane |
| Workshop floors | Mechanics, sheds, oil and hot-tyre resistance. | Workshop floor coating Brisbane |
| Showroom floors | Car yards and retail display areas. | Showroom epoxy flooring Brisbane |
| Retail stores | Shops with heavy foot traffic. | Retail epoxy flooring Brisbane |
| Restaurant & commercial kitchen | Food-safe, slip-resistant surfaces that are easy to hose down. | Restaurant epoxy flooring Brisbane |
| Bars & pubs | Spills, glassware and frequent cleaning. | Bar and pub epoxy flooring Brisbane |
| Salons | Chemical-resistant, seamless floors that are easy to sanitise. | Salon epoxy flooring Brisbane |
| Patios & outdoor areas | UV-stable topcoats and non-slip textures. | Patio epoxy flooring Brisbane |
| Pool surrounds | Barefoot grip and chlorine resistance. | Pool epoxy flooring Brisbane |
| Bathrooms | Continuous surfaces without grout lines. | Bathroom epoxy flooring Brisbane |
We also resurface kitchen benchtops in epoxy. See benchtop epoxy resurfacing.
Garage floor epoxy in Brisbane
Garage floors are where most Brisbane homeowners start. And they’re where cheap jobs fail fastest, because a car parked straight off a hot road is the hardest test a floor gets. Soft coatings soften under hot tyres and peel away with them.
Our garage system is a 100% solids epoxy base with a flake broadcast and a UV-resistant polyaspartic topcoat. A typical double garage (36–40 m²) runs about $2,700–$4,400, depending on the flake blend and how much repair the slab needs.
Full details, colours and photos are on our garage floor epoxy Brisbane page. For ideas, see garage epoxy ideas for Brisbane homes and how hot-tyre pickup happens in hot-tyre pickup on garage floors.
Residential, commercial and industrial epoxy flooring
Residential epoxy flooring in Brisbane
Inside the house, people mostly want two things: a floor that looks like nothing else on the street, and one they can mop in thirty seconds. Metallic epoxy in a living area or rumpus room does the first. Flake in a laundry or mudroom does the second. Outside, patios and alfresco areas need a UV-stable topcoat, because standard epoxy yellows in Queensland sun. That’s the main reason some outdoor epoxy jobs look tired after a couple of summers.
Commercial floors
Cafés, salons, retail stores and showrooms care about downtime as much as the finish. We plan commercial jobs around trading hours and tell you up front how long the floor needs before foot traffic. Kitchens need a slip-resistant, food-safe system that can be hosed down. Our commercial epoxy flooring guide for Brisbane covers the requirements.
Industrial and warehouse floors
Forklifts, pallet jacks and chemical spills need thicker, harder systems than a garage, and often line marking. Prices drop per m² as the area grows: we quote Brisbane warehouses from about $50–$90/m². See warehouse epoxy flooring Brisbane and industrial epoxy flooring Brisbane.
How much does epoxy flooring cost in Brisbane?
Epoxy flooring in Brisbane costs $60–$150 per m² in 2026, including diamond grinding, materials, labour and GST. Solid colour sits at the bottom of that range, flake in the middle, and metallic at the top. Large warehouses come in lower per m². Most installers, us included, have a minimum job charge of $1,200–$1,500.
| System | Price per m² | Single garage (18–20 m²) | Double garage (36–40 m²) |
|---|---|---|---|
| Solid colour epoxy | $60–$80 | $1,080–$1,440 | — |
| Flake epoxy (basic blend) | $75–$100 | $1,350–$1,600 | $2,700–$3,200 |
| Flake epoxy (mid-range blend) | — | $1,800–$2,200 | $3,600–$4,400 |
| Metallic epoxy | $90–$150 | $1,800–$3,000 | $3,600–$6,000 |
| Industrial / warehouse | $50–$90 | — | — |
| Commercial kitchen | $90–$140 | — | — |
What affects the price? Large cracks, old coatings that need removing, moisture problems requiring a vapour barrier, steps, drains and your chosen topcoat can add $5–$20 per m².
A note about cheap epoxy flooring: A quote well under $50/m² for a garage may leave out essential preparation, moisture testing or the topcoat. The upfront price may be lower, but repairing a failed floor can cost more.
For the full breakdown, including benchtops and DIY kits, see our Brisbane epoxy flooring cost guide.
How we install epoxy floors in Brisbane (and why some fail)
Most epoxy floors that fail do so for the same reason: something went wrong before the first coat. Here’s our process, and what goes wrong at each step when it’s rushed.
- Free on-site assessment. We inspect the slab, test moisture vapour emission with a meter, and bring colour samples. What goes wrong: a phone quote without a site visit can’t see cracks, old sealer or a damp slab.
- Industrial diamond grinding. The concrete is mechanically ground to open the surface and remove paint, sealer and oil. What goes wrong: an acid wash or pressure clean alone leaves a smooth, contaminated surface the epoxy can’t grip.
- Crack repair and primer. Cracks and pits are filled, then a primer is chosen to match the slab’s moisture reading. What goes wrong: a standard primer over a slab pushing out moisture traps the vapour. That’s where bubbles and blisters come from.
- 100% solids epoxy base coat. Solid colour, flake or metallic, applied thick. What goes wrong: thin, water-based products look the same on day one and wear through years earlier.
- UV-resistant polyaspartic topcoat. Seals the floor and stops yellowing in the sun. What goes wrong: a plain epoxy topcoat yellows and chalks in open garages and outdoor areas.
- Cure and handover. You get written aftercare instructions. Most garages are walkable in about 24 hours and ready for cars in 48–72 hours. Full chemical cure takes around 7 days.
Brisbane adds two complications. Older homes in suburbs like Kedron, Coorparoo and Ashgrove often have slabs with decades of oil, paint and sealer to grind off. And summer humidity drives more moisture up through concrete, which is why we test every slab rather than guessing. More on that in how to test concrete moisture before epoxy.
Brisbane suburbs we cover: northside and southside
We install epoxy floors right across greater Brisbane. If your suburb isn’t listed, ask anyway. We probably cover it.
Epoxy flooring on the Brisbane northside
Chermside · Aspley · Kedron · Nundah · Stafford · Everton Park · Bridgeman Downs · Carseldine · Albany Creek · Strathpine · North Lakes · Redcliffe · Caboolture · Morayfield
Epoxy flooring on the Brisbane southside
Carindale · Coorparoo · Holland Park · Mount Gravatt · Sunnybank · Calamvale · Rochedale · Wynnum · Manly · Cannon Hill
Inner and western suburbs
West End · New Farm · Ashgrove · The Gap · Indooroopilly · Kenmore · Jindalee
Nearby, we also have dedicated pages for epoxy flooring Logan, epoxy flooring Ipswich and epoxy flooring on the Gold Coast.
How to compare epoxy flooring installers in Brisbane
Get two or three written quotes, then compare how each installer prepares the slab, not just the total. Ask every company the same six questions:
| Ask This | A Good Answer | A Warning Sign |
|---|---|---|
| How will you prepare the concrete? | Diamond grinding or shot blasting | “We’ll acid wash it” |
| Do you test for moisture? | Yes, with a meter, before priming | “Brisbane slabs are always fine” |
| What product and topcoat? | 100% solids epoxy, UV-stable topcoat | Can’t name the system |
| What does the warranty cover? | A set number of years, in writing, covering workmanship | Verbal only, or “lifetime” with no terms |
| Are you QBCC licensed? | Licence number you can check on the QBCC register | Avoids the question |
| Can I see an older job? | Photos of floors a year or more old | Only fresh handover photos |
Fresh epoxy always looks good. How a floor looks after a Brisbane summer is the real test.
Our Answers
We diamond-grind every floor, test every slab for moisture, use 100% solids epoxy with a polyaspartic topcoat, and provide a 7-year written workmanship warranty. QBCC licence: [Licence number to be supplied by client]. We hold a 5.0 rating from 46 Google reviews (October 2026).
What Brisbane customers say
Discover why homeowners and businesses across Queensland trust Resin Masters for premium epoxy flooring, exceptional craftsmanship, and long-lasting results.
Get a FREE Quote Now!
Epoxy flooring Brisbane: frequently asked questions
Metallic epoxy flooring in Brisbane costs $90–$180 per square metre, depending on the design complexity and slab condition. At Resin Masters, a standard single metallic system for a garage (18m²) starts from $1,620. Our fully itemised quotes include diamond grinding, moisture testing, primer, metallic epoxy coats, UV-stable polyaspartic topcoat, and GST — so you see exactly what you’re paying for before you commit.
The average price for metallic epoxy floors in Brisbane ranges from $90 to $180 per square metre in 2026, installed professionally. Standard single-colour metallic systems sit at $90–$125/m². Multi-tone metallic designs run $120–$170/m², and the highest-skill application technique for commercial — range from $120–$180/m². Resin Masters provides fixed, fully itemised quotes so you always know your exact cost upfront.
Epoxy flooring in Brisbane costs $60–$160 per square metre, depending on the system. Standard flake epoxy starts from $65/m², solid colour from $50/m², and metallic epoxy — our premium system — from $90/m². Resin Masters provides transparent, itemised pricing on every quote, with no hidden charges. Contact us for a free on-site assessment and written quote for your Brisbane property.
Most professional epoxy floors in Brisbane cost $60–$150 per m² in 2026, including grinding and GST. A single flake garage is about $1,350–$2,200 and a double is about $2,700–$4,400. See the price table above.
For a low-use shed, it can be. Most kits are water-based and go onto concrete that hasn’t been diamond-ground, so in a garage you park in every day they tend to peel under hot tyres within a few years. Our Bunnings kit vs professional epoxy guide compares them.
Yes, with the right system. Patios, alfresco areas and pool surrounds need a UV-stable polyaspartic or polyurethane topcoat and a non-slip finish. Plain epoxy outdoors will yellow and chalk.
Most garages take 1–2 days on site. You can usually walk on the floor after about 24 hours and park on it after 48–72 hours. Full cure takes around 7 days.
Yes. We install epoxy floors across north, south, east and west Brisbane, plus Moreton Bay, Logan and Ipswich. See the suburb list above.
It depends on your floor. The best installer for a warehouse isn’t always the best for a metallic living room. Use the six questions in our comparison table, check reviews with photos of older jobs, and read our guide to Brisbane epoxy flooring companies.