“Bobby was super friendly and extremely knowledgable. Amazing with his craft, the end result was fantastic. 100% recommend to anyone.”
Epoxy Flooring Sunshine Coast: Garages, Homes and Coastal Floors
Resin Masters lays epoxy flooring across the Sunshine Coast, from Caloundra and Pelican Waters up to Noosa and back into the hinterland. A flake garage floor costs $65–$90 per m², about $2,340–$3,240 for a double garage. Every slab is moisture-tested and diamond-ground first, and every floor comes with a 7-year written workmanship warranty.
- $65–$90 per m²Flake garage floors
- 7 Yearwritten workmanship
- 5.0 ★49 Google reviews
- 5.0 on Google From 49 reviews
- 7-year warrantyOn every floor we lay
- Diamond-ground prepSeveral times thicker than floor paint
- Homes and businessesBased in Pimpama
| At a glance | |
|---|---|
| Flake garage floor | $65–$90 per m² |
| Metallic or marble-effect floor | $90–$165 per m² |
| Typical garage time on site | 1–2 days |
| Park on it | 48–72 hours after the final coat |
| Warranty | 7 years, in writing |
| Google rating | 5.0 from 49 reviews |
Coast or hinterland: why the same floor isn’t laid the same way
The Sunshine Coast is really two places for a floor. Down on the coast, the enemies are salt, sand and sun. Up the range, they’re damp and cooler slabs. A good quote reflects which one you live in.
Beachside and canal homes
Homes in Mooloolaba, Alexandra Headland, Minyama, Pelican Waters and the Noosa river side sit in salt air for their whole life. Salt and fine sand get walked and blown into the garage, and they act like sandpaper on a soft coating. Canal and riverfront slabs can also hold more ground moisture than a ridge-top block.
What that means for the floor:
- A UV-stable polyaspartic topcoat, not a plain epoxy top layer, so garage doors left open to the afternoon sun don’t yellow the floor near the opening.
- Flake or grit in the top layer, because wet feet from the beach or pool hit garage floors here more than anywhere else we work.
- A moisture reading before the primer is chosen. On damp slabs a moisture-blocking primer goes down first, which adds about $20–$30 per m².
Hinterland homes
Maleny, Montville, Mapleton, Palmwoods and the hinterland towns sit higher and cooler, often with older slabs under houses and carports. Those slabs tend to be uneven, stained and sometimes poured without the plastic membrane modern slabs sit on, so ground moisture rises more freely. Expect more grinding, a moisture test and sometimes a levelling compound before coating. In cooler months, coatings also take longer to firm up, so allow the full cure time before moving cars and furniture back in.
New estates
New slabs in Aura (Baringa and Caloundra West), Palmview and Harmony keep drying out for months after the house is handed over. Coating one too early traps that water under the epoxy. We test the slab first and tell you honestly if it needs more time or a moisture-blocking primer.
Epoxy floors we lay on the Sunshine Coast
Garages are most of the work, but Sunshine Coast searches ask about interior and decorative floors more than our other regions do: kitchens, living areas and home offices in Mooloolaba, Buderim and Nambour. Each floor type below has its own Sunshine Coast page with photos, prices and suburbs.
| Floor | Best for | More detail |
|---|---|---|
| Seamless flake epoxy | Garages, laundries, workshops. Hides dust and tyre marks and gives grip | Flake flooring on the Sunshine Coast |
| Garage floor epoxy | Single, double and triple garages, including hot-tyre and oil resistance | Garage floor epoxy Sunshine Coast |
| Metallic and marble-effect epoxy | Living areas, kitchens, showrooms, home bars | Metallic epoxy flooring Sunshine Coast |
| Solid colour epoxy | Budget garages, storerooms, plant rooms | Solid colour epoxy Sunshine Coast |
| Patio and alfresco | Covered outdoor areas with a UV-stable, non-slip finish | Patio epoxy Sunshine Coast |
| Pool surrounds | Non-slip, chlorine-resistant decks | Pool epoxy Sunshine Coast |
| Bathrooms | Seamless, slip-rated wet-area floors | Bathroom epoxy Sunshine Coast |
| Cafés, restaurants, salons, retail | Hose-down, slip-rated commercial floors | Restaurant epoxy Sunshine Coast |
| Workshops, warehouses, industrial units | Kunda Park, Kawana, Caloundra West and Coolum industrial areas | Industrial epoxy Sunshine Coast |
What epoxy flooring costs on the Sunshine Coast
Most Sunshine Coast garage floors cost $50–$90 per m² in 2026, depending on the finish and how much repair the slab needs. These are Resin Masters’ published rates; your quote is fixed after a site visit.
| System | Per m² | Single garage (18 m²) | Double garage (36 m²) |
|---|---|---|---|
| Solid colour epoxy | $50–$75 | $900–$1,350 | $1,800–$2,700 |
| Flake epoxy | $65–$90 | $1,170–$1,620 | $2,340–$3,240 |
| Polyaspartic coating | $75–$110 | $1,350–$1,980 | $2,700–$3,960 |
| Metallic / marble effect | $90–$165 | $1,620–$2,970 | $3,240–$5,940 |
What pushes a Sunshine Coast quote up: a damp slab that needs a moisture-blocking primer, cracks and old coatings to remove, and outdoor areas that need a heavier UV-stable topcoat. For kitchens, patios and commercial floors, see the full Sunshine Coast epoxy flooring cost guide.
How a Sunshine Coast job runs
We’re based in Pimpama on the northern Gold Coast and travel up to the Sunshine Coast for each job. Here’s what happens, in order.
- Quote visit. We measure the floor, take a moisture reading, check cracks and old coatings, and give you a fixed written quote listing every step.
- Grinding and repairs. The whole slab is diamond-ground, never acid-washed, and cracks and joints are filled.
- Primer and base coat. A moisture-blocking primer goes down first if the reading calls for it.
- Flake or finish. Flake is broadcast into the wet base, or the metallic or solid colour is laid.
- Topcoat. A UV-stable topcoat seals it, with grit added where you want extra grip.
- Back in. Walk on it after about 24 hours and park after 48–72 hours. Full cure takes around 7 days.
Most garages take one to two days on site. In peak summer we start application in the morning, before the slab heats up.
Sunshine Coast areas we cover
We lay floors right across the Sunshine Coast Council and Noosa Shire areas. If your suburb isn’t listed, ask.
| Area | Suburbs |
|---|---|
| Caloundra and the south | Caloundra, Kings Beach, Golden Beach, Pelican Waters, Caloundra West, Baringa, Aura, Little Mountain, Currimundi |
| Kawana and Mooloolaba | Kawana Waters, Birtinya, Warana, Bokarina, Buddina, Minyama, Parrearra, Mooloolaba, Alexandra Headland |
| Maroochydore and Buderim | Maroochydore, Cotton Tree, Kuluin, Kunda Park, Buderim, Forest Glen, Sippy Downs, Palmview |
| North coast and Noosa | Bli Bli, Pacific Paradise, Marcoola, Coolum Beach, Peregian Beach, Noosa Heads, Noosaville, Tewantin, Sunrise Beach |
| Hinterland | Nambour, Woombye, Palmwoods, Yandina, Eumundi, Maleny, Montville, Mapleton, Beerwah, Landsborough |
Closer to Brisbane? See epoxy flooring Brisbane. For every region we cover, see areas we serve.
Sunshine Coast suburbs, A to Z.
We lay epoxy floors across the Sunshine Coast Council and Noosa Shire areas. All 145 suburbs and localities we cover are listed here: find yours in the list or on the map.
Sunshine Coast Council 119
- Alexandra Headland
- Aroona
- Bald Knob
- Balmoral Ridge
- Baringa
- Battery Hill
- Beerburrum
- Beerwah
- Belli Park
- Bells Creek
- Birtinya
- Bli Bli
- Bokarina
- Booroobin
- Bridges
- Buddina
- Buderim
- Burnside
- Caloundra
- Caloundra West
- Cambroon
- Chevallum
- Coes Creek
- Conondale
- Coochin Creek
- Coolabine
- Cooloolabin
- Coolum Beach
- Corbould Park
- Cotton Tree
- Crohamhurst
- Curramore
- Currimundi
- Diamond Valley
- Dicky Beach
- Diddillibah
- Doonan
- Dulong
- Eerwah Vale
- Elaman Creek
- Eudlo
- Eumundi
- Flaxton
- Forest Glen
- Gagalba
- Gheerulla
- Glass House Mountains
- Glenview
- Golden Beach
- Harper Creek
- Highworth
- Hunchy
- Ilkley
- Image Flat
- Kawana Waters
- Kenilworth
- Kiamba
- Kidaman Creek
- Kiels Mountain
- Kings Beach
- Kulangoor
- Kuluin
- Kunda Park
- Kureelpa
- Landers Shoot
- Landsborough
- Little Mountain
- Maleny
- Mapleton
- Marcoola
- Maroochy River
- Maroochydore
- Meridan Plains
- Minyama
- Moffat Beach
- Mons
- Montville
- Mooloolaba
- Mooloolah Valley
- Mount Coolum
- Mount Mellum
- Mountain Creek
- Mudjimba
- Nambour
- Ninderry
- Nirimba
- North Arm
- North Maleny
- Obi Obi
- Pacific Paradise
- Palmview
- Palmwoods
- Parklands
- Parrearra
- Peachester
- Pelican Waters
- Peregian Beach
- Peregian Springs
- Perwillowen
- Point Arkwright
- Reesville
- Rosemount
- Shelly Beach
- Sippy Downs
- Tanawha
- Towen Mountain
- Twin Waters
- Valdora
- Verrierdale
- Warana
- West Woombye
- Weyba Downs
- Witta
- Woombye
- Wootha
- Wurtulla
- Yandina
- Yandina Creek
- Yaroomba
Noosa Shire 26
- Black Mountain
- Boreen
- Boreen Point
- Castaways Beach
- Como
- Cooran
- Cooroibah
- Cooroy
- Cooroy Mountain
- Cootharaba
- Federal
- Kin Kin
- Lake Macdonald
- Marcus Beach
- Noosa Heads
- Noosa North Shore
- Noosaville
- Pinbarren
- Pomona
- Ridgewood
- Ringtail Creek
- Sunrise Beach
- Sunshine Beach
- Teewah
- Tewantin
- Tinbeerwah
Not in the list? We may still cover it. Call or text 0433 733 956.
How to choose an epoxy installer on the Sunshine Coast
There are plenty of five-star epoxy companies on the Sunshine Coast, several of them local and long-established. Star ratings won’t separate them. These checks will:
- Licence. Ask for the QBCC licence number and check it on the QBCC register before you sign.
- Moisture test. A good quote says a moisture reading will be taken, and what happens if it’s high.
- Diamond grinding. The whole slab ground, not acid-etched. Acid etching is the shortcut behind most peeling floors.
- Topcoat. The quote names a UV-stable topcoat. Plain epoxy yellows in coastal sun.
- Warranty terms. Ask how many years, what it covers (peeling, lifting, bubbling) and what voids it. “Lifetime” means little without the terms in writing.
- Old jobs. Ask to see a floor that’s at least two summers old, ideally near the beach.
Use the same checks on us. Our own guide to the best epoxy contractors on the Sunshine Coast goes through them in more detail.
Don’t just take our word.
Press play to hear customers talk about their new floors, or read what customers are saying about Resin Masters on Google.
White-base flake garage. Our standard flake system over a crisp white base, with a polyaspartic topcoat. The customer does the talking.
Black and purple metallic. A glossy metallic floor in black and purple, with white veins and a touch of gold. Hear it from the customer.
“Bobby has done an exceptional job for our warehouse here on the Gold Coast. Very clean, and tidy finishing, would not fault!”
Want a floor like these? Send us a photo of the space and we’ll quote it for free.
Get a free quote“Got our outdoor patio sorted before the weekend. The boys were super punctual, easy to deal with, and handled the whole job here in Yarrabilba with zero hassle. Our flake floor looks so amazing. Cheers and Thank you Resin Masters.”
“Had the Resin Masters team out to do my garage floor in Ormeau last week. The old concrete was constantly dusty and had a couple of nasty cracks in it. The boys ground it all back, patched up the cracks, and laid down the full flake epoxy. Honestly looks insane, like a proper showroom. No more dust tracking into the house. Highly recommend these guys if you want a quality finish.”
Rating and reviews from our Google Business Profile.
How much does epoxy flooring cost on the Sunshine Coast?
Most garage floors cost $50–$90 per m², and a double flake garage is about $2,340–$3,240. Metallic and marble-effect floors for living areas run $90–$165 per m². Moisture-blocking primer, crack repairs and old coating removal add to the price.
Does epoxy hold up near the beach?
Yes, if the system is built for it. Near the beach that means diamond grinding for a strong bond, a UV-stable polyaspartic topcoat so it doesn’t yellow, and flake or grit for grip when floors get wet. Rinse salt and sand off every few weeks with warm water and a pH-neutral cleaner.
Is epoxy or polished concrete better for a Sunshine Coast home?
Polished concrete suits a new slab you want to show off, and it lasts well indoors. Epoxy suits an existing or imperfect slab, because it covers stains and repairs, and it’s the better choice for garages, where oil and hot tyres mark bare concrete. For wet areas and pool surrounds, a non-slip epoxy finish is easier to keep safe than a polished surface.
Can you do epoxy kitchen and living-area floors?
Yes. Metallic and solid colour epoxy suit kitchens, living areas and home offices on a sound slab. The floor needs grinding, crack repair and a level surface first, so interior floors cost more per m² than a garage. See metallic epoxy flooring on the Sunshine Coast.
How long does a Sunshine Coast garage take?
One to two days on site for most single and double garages. You can walk on it after about 24 hours and park after 48–72 hours. Damp slabs that need a moisture-blocking primer can add a day.
Do you work in the Noosa Shire and the hinterland?
Yes. We cover Noosa Heads, Noosaville, Tewantin and Peregian, and the hinterland towns from Nambour to Maleny. Older hinterland slabs often need more preparation, which we’ll tell you at the quote visit.
Get a Sunshine Coast epoxy flooring quote
Tell us your suburb, the floor and roughly how big it is. We’ll book a quote visit, test the slab and send a fixed written quote with every step listed.
Other areas.
We’re based in Pimpama and lay floors right across South East Queensland and Northern NSW.
- Epoxy Floors in BrisbaneNorthside to southside
- Epoxy Flooring ToowoombaHighfields to Westbrook, and the Darling Downs
- Epoxy Flooring IpswichSpringfield to Rosewood
- Epoxy Flooring in LoganSpringwood to Yarrabilba
- Epoxy Flooring Gold CoastOrmeau to Coolangatta, including Southport, Main Beach and Surfers Paradise
- Epoxy Flooring Northern NSWTweed Heads to Byron Bay, Ballina and Lismore
- All areas we serveEvery area and every floor
Send us a photo of your floor.
Snap the space as it is now, tell us roughly how big it is, and we’ll come back with a free quote.
