Servicing : Gold CoastBrisbaneSunshine CoastToowoomba
Epoxy Floor Colours: Solid, Flake and Metallic Options
Epoxy floors come in three finish families: solid colour, decorative flake and metallic. Solid colour is one flat shade, flake adds speckled chips in blended colours, and metallic swirls pearlescent pigment through the resin. Your choice depends on how the floor will be used, how much slab imperfection you want hidden and the light in the room.
Colour is the fun part, and it’s also where owners regret choices. A pale floor shows tyre marks. A dark floor shows dust. A glossy solid shows every ripple in the slab. Here’s how each option behaves once it’s on the floor.
What epoxy floor finishes are available?
The three finishes are solid colour, decorative flake and metallic. Solid colour is the simplest and most affordable. Flake blends coloured chips through the resin for texture and camouflage. Metallic gives the marbled, high-end look. Resin Masters applies all three over ground concrete and seals them with a clear topcoat.
| Finish | Look | Slip resistance | Hides slab flaws | Upkeep | Cost |
|---|---|---|---|---|---|
| Solid colour | Flat, uniform shade | Smooth; anti-slip optional | Poorly under gloss | Wipes clean; shows dust | $50 to $90 per m2 |
| Flake | Speckled, granite-like blend | Good, from the chip texture | Very well | Hides dust and marks | $60 to $110 per m2 |
| Metallic | Swirled, three-dimensional depth | Smooth; anti-slip advised when wet | Moderately | Shows scratches more | $100 to $160+ per m2 |
What colours does solid epoxy come in?
Solid epoxy can be tinted to a wide range of flat colours, from greys and charcoals to whites, tans, blues and reds. Neutral greys are the most common in homes and garages. Bright colours suit workshops, showrooms and safety zones. Resin Masters brings physical colour samples to the free consultation, so you can pick the shade under your own lighting.
Solid is the plainest floor and the least forgiving. A glossy finish will show every dip and ripple in the slab, so ask your installer how they level and fill the surface. See our page on solid colour epoxy flooring for more.
What colours does flake epoxy come in?
Flake epoxy comes in pre-blended mixes of small coloured chips, usually built around greys, blacks, tans, browns and blues. The chips are scattered into a wet base coat, then sealed. A mid-tone blend hides both dust and tyre marks. Resin Masters uses multi-colour vinyl chip blends and brings physical flake colour and size samples to every free consultation.
Flake is the safe choice for most garages. Many owners ask for a blend close to their concrete’s colour so that a chip or scuff doesn’t stand out. Chip size changes the look: small chips read as a fine granite, large chips as a bolder pattern.
What colours does metallic epoxy come in?
Metallic epoxy uses pearlescent pigments in a base colour, from silvers and charcoals to blues and bronzes. No two floors match, because the pigment is worked by hand and flows as it sets. Resin Masters develops the colour direction in your space, and its examples include midnight charcoal with silver and ocean blue with grey.
Because it’s smooth and reflective, metallic shows scratches and wet footprints more than flake, and it can be slippery when wet without an anti-slip additive. It’s a feature floor. It’s not the workhorse for a busy workshop.
How do you choose the right epoxy floor colour?
Choose by use first, then by look. Mid-tone flake hides dust and tyre marks in garages. Solid colours suit workshops and clean spaces. Metallic suits feature floors where looks matter more than scuff resistance. Test samples in your own light, because a colour changes between morning sun, shade and LED lighting.
- Light floors look bright and open but show tyre marks and stains.
- Dark floors look sleek but show dust and can be hot underfoot in direct sun.
- Mid-tone flake is the most forgiving in busy areas.
- Match your surroundings. Look at wall, cabinet and door colours next to the sample.
Ask to see a sample board or a finished floor, in daylight, before you decide.
Which colours suit a garage, kitchen or alfresco?
Garages suit mid-tone flake blends. Kitchens and laundries suit fine flake or solid colours in a light or mid-tone shade. Living areas suit metallic or solid finishes. Alfresco areas suit flake with a UV-stable topcoat. Each room asks for a slightly different balance of look, grip and hiding power.
| Space | Good options | Why |
|---|---|---|
| Garage | Mid-grey or tan flake | Hides dust, oil and tyre marks |
| Kitchen or laundry | Fine flake or light solid with anti-slip | Easy to clean, grip when wet |
| Living area | Metallic or solid | Polished look, works with modern interiors |
| Alfresco or patio | Flake, UV-stable topcoat | Handles sun, rain and slip risk |
| Workshop or warehouse | Solid, safety colours for zones | Clear visibility and easy marking |
For a garage-only view, see best garage floor coating colours. For rooms, see epoxy flooring for Queensland homes.
Will epoxy floor colours fade in the Queensland sun?
Standard epoxy can chalk or yellow in direct sunlight, which changes how light colours look over time. A UV-stable polyurethane or polyaspartic topcoat reduces this. For a sunny alfresco, a garage with the door open all day or a floor by large windows, ask which topcoat is included.
White and pale solids show yellowing first. Darker and mid-tone finishes hide it better. Resin Masters uses a UV-stable, hot-tyre-resistant polyaspartic topcoat as standard, backed by its 7-year workmanship warranty.
Who is this colour guide not for?
This guide isn’t for anyone choosing a colour on a screen alone. Photos and monitors change colours, and floors look different in real light. It’s also not the right guide if your slab is damp or cracked, since fixing the slab comes before choosing colours.
Always confirm the colour with a physical sample before work starts.
Frequently asked questions
How many epoxy floor colours are there?
Solid epoxy can be tinted to almost any shade. Flake comes in dozens of blends, and metallic in a range of pigment palettes. Resin Masters brings physical samples to every free consultation, so you can compare options in your own light.
What is the best epoxy colour for a garage?
Mid-tone grey or tan flake is the safest choice. It hides dust, oil and tyre marks better than pale solids or black. Match it to your walls and door, and view a sample in your garage’s light before you decide.
Do dark epoxy floors get hot?
Dark surfaces absorb more heat, so a black or charcoal floor in direct sun can feel warm underfoot. Under a covered garage or indoors it’s less of an issue. For sunny alfresco areas, mid-tone finishes are more comfortable.
Can you combine flake and solid colours in one floor?
Often, yes. Common examples are a solid border with a flake field, or a solid safety line in a workshop. Design and layout affect the price, so ask for the layout to be written into your quote.
Does epoxy floor colour affect the price?
The finish family affects price more than the colour itself. Resin Masters’ published ranges are $50 to $90 per m2 for solid, $60 to $110 for flake and $100 to $160 or more for metallic. Try the cost calculator and ask about any colour-specific charge at your free quote.